Sharp MX-C303W Troubleshooting Manual page 26

Copying Problems
COLORS ARE OFF
?
Check
Did you perform "Registration
Adjustment"?
PART OF THE IMAGE IS CUT OFF
?
Check
Has an appropriate ratio been
selected for the original size and
paper size?
Does the original size shown on the
touch panel match the actual size of
the original?
COPIES COME OUT BLANK
?
Check
Is the original placed face up or face
down correctly?
I WANT TO COPY MULTIPLE A4 PAGES ONTO
?
ONE A4 SHEET OF PAPER
Check
Use N-Up.
Solution
!
■ Ask your administrator to perform "Registration Adjustment".
 "Settings (administrator)" → [System Settings] → [Image Quality Adjustment]
→ [Collective Adjustment] → [Registration Adjustment] .
If the color tones are off, perform [Auto Color Calibration (for Copy)] after
finishing registration adjustment. (If the colors are still off after calibration,
repeating calibration may improve the results.)
 "Settings (administrator)" → [System Settings] → [Image Quality Adjustment]
→ [Common Functions] → [Auto Color Calibration (for Copy)]
Solution
!
■ Select an appropriate ratio setting.
■ Check if the size of the original you placed matches the paper size setting. If not,
set the correct original size.
Solution
!
■ When using the document glass, the original must be placed face down. When
using the automatic document feeder, the original must be placed face up.
Solution
!
■ N-Up lets you reduce and copy the images of up to eight A4 pages on one sheet.
Tap the [N-Up] key.
In normal mode, you can also add borders to N-Up copies.
26