Adjusting The Viewfinder - JVC Connected Cam GY-HC550U Instructions Manual

4k memory card camera recorder
Hide thumbs Also See for Connected Cam GY-HC550U:
Table of Contents

Advertisement

Adjusting the Brightness
Use the [LCD BRIGHT +/-] button to adjust the
brightness of the LCD monitor.
The [+] button brightens the monitor and the
0
[-] button darkens it.
Press the [+] and [-] buttons simultaneously
0
to return to standard settings.
During adjustment, the brightness level is
0
displayed on the LCD monitor.
1 /64
ND
AE ±
1 / 60
F2.8
.
Adjusting the Contour
Use the [PEAKING +/-] button to adjust the
contour of the LCD monitor.
(The contour of the viewfinder screen will also
be adjusted.)
The [+] button increases contour correction
0
and the [-] button decreases contour
correction.
Press the [+] and [-] buttons simultaneously to
0
return to standard settings.
During adjustment, the contour level is
0
displayed on the LCD monitor.
1 /64
ND
AE ±
1 / 60
F2.8
.
Adjusting the Contrast
Use the [LCD Contrast] menu to adjust the
contrast of the LCD monitor.
Adjust using [LCD/VF] B [LCD Contrast].
0
(A P125 [ LCD Contrast ] )
Increasing the value increases the contrast.
0
[Setting Values: +10 to -10] (Default value: 0)
44
Adjusting the LCD Monitor and Viewfinder
0
K
102400 B 5600
ISO
0
K
ISO
102400 B 5600

Adjusting the Viewfinder

You can change the brightness and peaking of the
viewfinder screen according to your usage
conditions.
Changing the brightness of the screen will not
affect the recorded images.
PEAKING
.
Caution :
A high-definition viewfinder is used on this
0
camera recorder in order to provide an accurate
focusing environment. Due to the characteristic
of the display device, colors may appear on the
images when you blink your eyes. This is not a
malfunction. It does not affect the recorded
images, SDI output, or HDMI output.
1 Incline the viewfinder vertically to a
position that enables easy viewing.
2 Turn the visibility adjustment lever to
adjust the visibility.
Turn the visibility adjustment lever to sharpen
the image on the viewfinder screen.
3 Adjust the brightness, contour, and
contrast of the viewfinder screen.
1
2

Advertisement

Table of Contents
loading

Table of Contents