Changing View Remote Function Settings; Changing Connection Setup - JVC GY-HM660E Instructions Manual

Changing View Remote Function
Settings
For performing setting for using the View Remote
function.
.
A [Camera Name]
For setting the name that appears at the top
0
left of the view screen.
Tapping the text input area displays a
0
software keyboard.
If you are using a PC, enter using the PC
keyboard.
By tapping the Go key after input is complete,
0
the software keyboard disappears.
B [Restrictions]
For setting the buttons to be disabled on the
View screen while in the locked mode.
[REC]:
0
For setting whether to disable the Stop
Record button, zoom operation, and camera
control during recording.
Tap (click) each item to switch between
[Unlock] and [Lock].
[Except REC]:
0
For setting whether to disable the record
button, zoom operation, and camera control
in any mode other than the recording mode.
Tap (click) each item to switch between
[Unlock] and [Lock].
C [Save]/[Cancel]
Tap (click) [Save] to save the settings.
Tap (click) [Cancel] to stop setting and return to
the main [Settings] screen.

Changing Connection Setup

You can change the settings for each of the preset
items on the [Wizard] screen of the camera
recorder.
If all the items cannot be displayed in a single
0
page, scroll down to display the remaining
items.
Items that cannot be changed are grayed out
0
A according to the type of adapter connected and
the mode of connection.
B
C
.
A Type of Adapter Connected
B Mode of Wireless LAN Connection
C [Search Access Point] Button
Tap (click) to display a list of the detected
access points.
The currently selected access point is indicated
by a dot mark ( 0 ).
.
HM660
HM660
A
B
C
D
171