System Menu - JVC CONNECTED CAM GY-HC500U Instructions Manual

System Menu

This menu screen allows system-related settings.
For configuring recording settings, formatting and
restoration of a recording media, tally lamp setting,
date/time, time zone and other settings.
It can also be used to reset the menu settings to
their default values.
Record Set...
For specifying recorded video-related settings.
(A P156 [Record Set Item] )
Media
9 Format Media
For formatting (initializing) a recording media.
Select a card slot, select [Format] from [Cancel]/
[Format], and press the Set button (R) to format
(initialize) the card.
(A P51 [Formatting (Initializing) of Recording
Media] )
9 Restore Media
For restoring a recording media.
Select a card slot, and press the Set button (R) to
restore the recording media.
(A P52 [Repairing the Recording Media] )
Memo :
[! RESTORE] appears in the remaining level
0
display area when a recording media that
requires repair is inserted. However, it is not
selectable when recording in Camera mode and
during Clip Review.
154
System Menu
Setup File
This allows you to save the menu settings as well
as the performance results of shutter speed and
AWB.
It is useful to save settings according to different
shooting conditions.
9 Load File...
Loads the settings.
(A P181 [Loading a Setup File] )
9 Store File...
Saves the settings.
(A P180 [Saving Setup Files] )
9 Delete File...
Deletes the settings.
(A P181 [Deleting Setup Files] )
Tally Lamp
For setting whether to light up the tally lamp during
recording, when the remaining space warning is
displayed, or during live streaming.
Memo :
The blinking warning display, such as when the
0
remaining battery level is low, is enabled in a
setting other than "Off".
Rec/Live Streaming:
0
Lights up during recording or live streaming.
Live Streaming:
0
Lights up during live streaming. Does not light
up during recording.
Rec:
0
Lights up during recording.
External:
0
Lights up when the camera recorder is
controlled by an external device such as RM-
LP100.
When external is selected, [PVW] is displayed
on the LCD/VF screen during Preview Tally, and
[PGM] is displayed on the LCD/VF screen
during Program Tally.
Off:
0
Turns off the indicator.
[Setting Values: Rec/Live Streaming, Live
Streaming, RRec, External, Off]