Ghost Controls DTP1XP Installation And Owner's Manual page 36

36
CANCELLING AUTOCLOSE TIME ON YOUR GATE
NOTE
Canceling AUTOCLOSE can only be performed when the gate opener is idle.
Cancelling AUTOCLOSE will remove your previous duration setting and force you to pick a new duration the next time
you enable AUTOCLOSE. You can use PartyMode
current AUTOCLOSE duration when PartyMode
because turning the system back on will automatically reengage the AUTOCLOSE feature.
A . Press and hold the
SET AUTOCLOSE TIME
B. Release the
ing at the rate of 1 blink per second
C. Within 5 seconds, press and release the
feature.
D. The AUTOCLOSE feature is now disabled until you enable it with a new setting. IF THE AUTOCLOSE LED
IS STILL ON, THE AUTOCLOSE HAS NOT BEEN DISABLED.
AUTOCLOSE LED INDICATOR
The AUTOCLOSE LED indicates which mode the gate system controller is currently in. Note that this LED will turn OFF
after one minute of inactivity to conserve system power.
AUTOCLOSE AUTOCLOSE is enabled but temporarily suspended
is enabled because PartyMode has been activated. Disabling
PartyMode will turn the LED back to a Solid On.
© G h o s t C o n t r o l s
®
®
SET AUTOCLOSE TIME
SET AUTOCLOSE TIME
2 0 2 0
to temporarily disable AUTOCLOSE and the system will retain your
®
button until it beeps.
button. The LED next to the AUTOCLOSE button will start blink-
button to disable the AUTOCLOSE
Assuming system has been active within
the last minute, this indicates that
AUTOCLOSE is disabled.