Removal and replacement procedures
Preliminary replacement requirements
You will need the following tools to complete the removal and replacement procedures:
Phillips P0 and P1 screwdrivers
Torx8 T8 screwdriver
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
Chapter 4 Removal and replacement procedures
Using excessive force during disassembly and reassembly can damage plastic parts. Use