7.
Lift the right side of the system board (3), and then swing it up and to the left until it rests upside
down on the left side of the computer.
8.
Disconnect the WLAN antenna cables from the terminals on the WLAN module.
NOTE:
white WLAN antenna cable is connected to the WLAN module "Aux" terminal.
9.
Remove the system board.
Reverse the preceding procedure to install the system board.
62
Chapter 4 Removal and replacement procedures
The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The
Need help?
Do you have a question about the 2133 Mini-Note and is the answer not in the manual?