Recovering - HP 2133 Mini-Note Maintenance And Service Manual

NOTE:
using them for backup reduces the number of recovery discs required.
●
When backing up to discs, number each disc before inserting it into the optional external optical
drive.
To create a backup using Backup and Restore Center, follow these steps:
NOTE: Be sure that the computer is connected to AC power before you start the backup process.
NOTE: The backup process may take over an hour, depending on file size and the speed of the
computer.
1. Click Start, click All Programs, click Maintenance, and then click Backup and Restore Center.
2. Follow the on-screen instructions to back up your entire computer (select models only) or your files.

Recovering

In case of system failure, use the
NOTE: The image includes the Windows operating system and software programs installed at the
factory.
CAUTION:
have created and any software installed on the computer are permanently removed. The
tool reinstalls the operating system and HP programs and drivers that were installed at the factory.
Software not installed at the factory must be reinstalled. Personal files must be restored from a backup.
1. If possible, back up all personal files.
2. If possible, check for the presence of the HP Recovery partition. To find the partition, click Start,
and then click Computer.
NOTE:
system and programs using the Windows Vista Operating System and the Driver Recovery discs
(purchased separately). For additional information, contact technical support.
3. Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
4. Press f11
5. Follow the on-screen instructions.
NOTE: Windows Vista provides additional recovery tools through the operating system. For additional
information, go to Help and Support.
NOTE: If you are unable to boot (start up) your computer, you must purchase a Windows Vista
Operating System DVD to reboot the computer and repair the operating system. For additional
information, contact technical support.
104 Chapter 8 Backup and recovery
DVDs and DVDs with double-layer (DL) support store more information than CDs, so
f11
Using f11 completely erases hard drive contents and reformats the hard drive. All files you
If the HP Recovery partition has been deleted, you will need to recover your operating
while the "Press <F11> for recovery" message is displayed on the screen.
recovery tool to recover your original hard drive image.
esc while the "Press the ESC key for Startup Menu"
f11 recovery