Grizzly G9972Z Owner's Manual page 36

NOTICE
NEVER move the feed rate dials while the
lathe is running, and NEVER force the dials
when shifting. If the dial will not engage,
rotate the spindle by hand while keeping
light pressure on the dial. As the spindle
rotates, the feed rate gears will align and
the dial will slip into position.
Example of Setting Feed Rate
Step 1:
40 Page 32
Step 2:
Figure 42 Page 32
Figure
Figure 45.
Step 3:
Step 4:
B Figure 44
Note: It may be necessary to jog the spindle by
hand to mesh the feed rate gearing and complete
the setting of the dials.
Figure 44.
1
a
b
II
2