Grizzly G9972Z Owner's Manual page 19

Carriage
Figure 12.
A. Follow Rest:
B. 4-Way Tool Post Lock Lever:
C. Compound Slide Handwheel:
D. Thread Dial:
E. Half-Nut Lever:
F. Power Feed Lever:
NOTICE
NEVER attempt to engage the carriage
power feed (lever up) and the half-nut (lever
down) at the same time, and NEVER force
these levers. Always disengage the half-nut
(lever up) before moving the power feed
lever up. Otherwise, severe damage to the
lathe could occur.
G. Carriage Handwheel:
H. Cross Slide Handwheel:
I. Compound Slide Lock Nuts:
Tailstock
Figure 13.
A. Quill:
B. Quill Lock:
C. Quill Handwheel:
D. Tailstock Lock Nut: