Compound Slide; Tool Post - Grizzly G9972Z Owner's Manual

Compound Slide

Handwheel Dial Increments
Tools Needed
To set the compound slide angle:
1.
Figure 33.
2.
3.
Resolution
Qty
Figure 33
Figure 33

Tool Post

Tools Needed
To load and use the tool post:
1.
Figure 34
Note: To properly secure the tool, make sure
a minimum of two post cap screws are hold-
ing the tool.
Figure 34.
2.
3. Steps 1–2
4.
Note: The tool post is aligned in four rota-
tional positions by an indexing pin in the
compound slide that engages indents in the
tool post base.
Qty