Section 6: Maintenance - Grizzly G9972Z Owner's Manual

SECTION 6: MAINTENANCE

Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
Daily Check:
Every 6–8 Hours of Operation:
Pages 41–44
After First Three Months and Annually:
DO NOT use compressed air to blow away
chips from the lathe to avoid the risk of
flying metal debris injuring yourself or oth-
ers, or driving the chips deep into the lathe
mechanisms resulting in damage or prema-
ture wear.
Page 42
Cleaning &
Protecting
Page 37
ACCESSORIES