Settings Overview - quadient IS-6000 User Manual

8.1

Settings Overview

This section describes two types of settings:
• User settings , that only last as long as the user who applies them is logged in
• Supervisor settings , sets the default or permanent characteristics of your Mailing
System.
User Settings
The user settings described in the sections below are:
• Setting the display language
• Adjusting the screen brightness
• Enabling/disabling key beeps and warning/error beeps.
Supervisor Settings
The Mailing System has one supervisor PIN code that allows you to configure the mailing
functions and perform other functions such as managing accounts and access rights,
generating certain reports, etc.
The supervisor settings allow you to:
• Change the default user settings
• Modify system time-outs
• Set credit warnings (high amount, low credit) and activate a crediting PIN code
• Define a default weighing method for mailing, and calibrate the weighing devices
• Design a default imprint (rate, ERA, slogan), activate the Automatic Date Advance
function and set a default printing offset
• Activate sealing mode by default
• Enter connection parameters
Other user settings are described in the corresponding
sections:Running Mail
The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.
on page 35 ,Maintenance on page 293 , etc.
217
8