quadient IS-6000 User Manual page 98

Or, to reset any item counter:
1. As a user:
Press
Batch settings
2. Press the [Reset] button next to the Print Mode counter you want to reset.
A confirmation screen is displayed.
Customizing the Stamp
Depending on the Print Mode, you can modify the stamp that is printed on mail pieces and
postage labels as follows:
• Change printed date
• Add a pre-loaded Slogan to the left of the stamp
• Add ERA to the left of the Slogan.
• Moving the imprint away from the right edge of the envelope
You can directly access these settings from the home screen by pressing the corresponding
buttons, or you can use an intermediate screen that summarizes all the imprint settings.
See also
• Offsetting the print position away from the right edge of the envelope. See
the Print Position
• Changing the printed date:
• The supervisor manages the list of the available ERA and Slogans. See
ERAs on page 282 and
and select the path:
Start batch counters (or type 3.7 )
on page 102.
Changing the Date in the Stamp
Managing Slogans
on page 103.
on page 284.
3
Offsetting
Managing
93