Inserter Mode; How To Activate The Inserter Mechanical Connection - quadient IS-6000 User Manual

8.14

Inserter Mode

You can connect an inserter to your Mailing System. If you have the electronic connection
option, the inserter drives automatically the Mailing System. This electronic connection
uses an RS232 cable between the inserter and the base of the Mailing System.
If the Mailing System and the inserter are not electronically connected, you need to activate
the "Inserter Mode ON" to use the Mailing System with the inserter.
As supervisor, you can set the "Inserter Mode ON" as the default mode.
Activating an Inserter Mechanical-only (Physical)
Connection

How to Activate the Inserter Mechanical Connection

1. As user:
Press
Batch settings
2. Select ON or OFF and press [OK] .
The inserter mode is activated or deactivated.
Setting the Inserter Mechanical Mode (Physical) as Default
Follow the procedure below to permanently work with an inserter without electronic
connection.
and type 3.11 or select the path:

Inserter mode

8
265