How to Process Mail without Printing
Once your mail is ready:
1.
Make sure that you are on the Print Mode [Pass through]. The name of the Print
Mode is indicated on the first line of the home screen as illustrated below.
3
If necessary, see
2.
Reset the item counter : see
Then, run mail. Place the envelope (or identical set) on the hopper. Mail should be
3.
placed against the rear wall and covering the optical (clear) sensor. Press
The Mailing System prints the mail pieces and sends them to the catch tray.
78
How to Change the Print Mode
Resetting the Item Counter
on page 80.
on page 54 .
to start.
Need help?
Do you have a question about the IS-6000 and is the answer not in the manual?