Steps To Run Ppi Mail - quadient IS-6000 User Manual

Running PPI Mail
After completing the initial set up in
the steps below to run mail.

Steps to Run PPI Mail

From the Print Mode: [PPI] mail home screen:
1. Start a new Operational PPI Report if necessary.
Press Reset/Report to open the Operational PPI Report screen and start a new report.
You can also print the current report before starting the new one.
For details, see
2. Select the sealing mode that corresponds to your mail stack: see
Sealing Mode on page 55 .
3. Depending on the weighing mode selected, run mail according to one of the sections
below:
Steps to Run Mail in Dynamic Weighing Modes
Running Mail in Standard Weighing Mode
Running Mail in Manual Weighing Mode
Steps to Set Up PPI Mail Printing
Operational PPI Report and Historic Reports
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
on page 183.
on page 59
on page 60
on page 64
on page 67 , follow
Checking the
71
3