Pitney Bowes DM150 Manual page 70

Replacing the Ink Cartridge/Printhead (continued)
4. Flip open the ink cartridge guard.
5. Lift up and remove old ink cartridge.
NOTE: If you are NOT changing the printhead, skip to
Step 6. If you have been directed by a representative
of your machine supplier to change the Print Head,
continue with step 5A below.
5A. Squeeze the two grey tabs on either
side of the printhead.
5B. While squeezing, lift and tilt to the
right the printhead. The printhead
should come up out of the
machine.
SDC570J
7 • Maintenance
Ink Cartridge
Guard
7-3