Chapter 6 - Intel Amt Settings (Kd330-Q170 Only) - DFI KD330-H110 User Manual

Chapter 6 - Intel AMT Settings (KD330-Q170 Only)

Overview
Intel Active Management Technology (Intel
®
provide maximum system defense and protection to networked systems.
The hardware and software information are stored in non-volatile memory. With its built-in
manageability and latest security applications, Intel
• Discover
Allows remote access and management of networked systems even while PCs are powered off;
significantly reducing desk-side visits.
• Repair
Remotely repair systems after OS failures. Alerting and event logging help detect problems
quickly to reduce downtime.
• Protect
Intel AMT's System Defense capability remotely updates all systems with the latest security
software. It protects the network from threats at the source by proactively blocking incoming
threats, reactively containing infected clients before they impact the network, and proactively
alerting when critical software agents are removed.
Chapter 5 Intel AMT Settings
AMT) combines hardware and software solution to
AMT provides the following functions.
®
Chapter 6
Enable Intel AMT in the Insyde BIOS
®
1. Power-on the system then press <Del> to enter the main menu of the Insyde BIOS.
2. In the Advanced menu, select Active Management Technology Support.
Main Advanced
 ACPI Confi guration
 CPU Confi guration
 Video Confi guration
 Audio Confi guration

SATA Confi guration
 USB Confi guration
 PCI Express Confi guration
 ME Confi guration

Active Management Technology Support
 MEBX Confi guration
 Debug Confi guration
 UEFI Device Manager
 SIO NUVOTON6106D
 SIO NCT5104D
 Console Redirection
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
3. Select Enabled in the Intel AMT Support field.
Advanced
Active Management Technology Support
Intel AMT Support
Un-Confi gure ME
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
58
InsydeH2O Setup Utility
Security Boot Exit
AMT Confi guration
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH2O Setup Utility
W h e n d i s a b l e d A M T
BIOS Features are no
longer supported and user
<Enabled>
is no longer able to access
<Disabled>
MEBx Setup.
Note :
This option does not dis-
able Manageability Fea-
tures in FW.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
Rev. 5.0
Rev. 5.0
www.dfi .com