DFI KD330-H110 User Manual page 55

Step 3: Create a RAID Volume
1. When the Intel RST option ROM status screen displays during POST, press <Ctrl> and
®
<I> simultaneously to enter the option ROM user interface.
2. Select 1: Create RAID Volume and press <Enter>.
3. Create a volume name and press <Enter>.
4. Use the up or down arrow keys to select the RAID level and press <Enter>.
5. Use the up or down arrow keys to select the strip size and press <Enter>.
6. Select the capacity and press <Enter>. You must select less than one hundred percent of
the available volume space to leave space for the second volume.
7. Press <Enter> to create the volume.
8. At the prompt, press <Y> to confirm volume creation.
9. Select 4: Exit and press <Enter>.
10. Press <Y> to confirm exit.
Chapter 5 RAID
Chapter 5
Step 3-1: Create a RAID Volume if the boot type is UEFI
If the boot type is set to UEFI, RAID volume creation will be different. Please use the following
steps to create RAID volumes. To set the boot type, enter the Insyde BIOS and go to "Boot"
>"Boot Type".
1. Go to the "Advanced" menu of the Insyde BIOS and select "UEFI Device Manager".
Main Advanced Security
 ACPI Confi guration
 CPU Confi guration

Video Confi guration
 Audio Confi guration
 SATA Confi guration
 USB Confi guration
 PCI Express Confi guration
 ME Confi guration
 Active Management Technology Support
 MEBX Confi guration
 Debug Confi guration
 UEFI Device Manager
 SIO NUVOTON6106D
 SIO NCT5104D
 Console Redirection
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item

2. The screen displays all available drives. Select "Create RAID volume" to create a RAID
volume".
3. Use the up or down arrow keys to select the RAID level and press <Enter>.
4. Use the up or down arrow keys to scroll through the list of hard drives and press <Enter>
to select the drive.
5. Press <Enter>.
6. Use the up or down arrow keys to select the strip size and press <Enter>.
7. Enter the volume size and press <Enter>.
8. At the prompt, press <Y> to confirm volume creation.
55
InsydeH2O Setup Utility Rev. 5.0
Boot Exit
Device Manager Setting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com