DFI KD330-H110 User Manual page 37

ME Configuration
This section configures settings relevant to flash ME region.
InsydeH2O Setup Utility
Advanced
Me Fw Image Re-Flash <Disabled>
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item

Me Fw Image Re-Flash
This field is used to enable or disable the flash ME region.
Chapter 3 BIOS Setup
Rev. 5.0
Enable/disable to fl ash ME
region
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Chapter 3
Active Management Technology Support (KD330-Q170 only)
The section allows users to enable or disable the Intel
AMT) BIOS extension. Please refer to Chapter 6 for more information.
Advanced
Active Management Technology Support
Intel AMT Support
Un-Confi gure ME
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
Intel AMT Support
This field is used to enable or disable Intel
Extension.
Un-Configure ME
This field is used to enable or disable un-figuring ME without password.
37
Active Management Technology (Intel
®
InsydeH2O Setup Utility
W h e n d i s a b l e d A M T
BIOS Features are no
longer supported and user
<Enabled>
is no longer able to access
<Disabled>
MEBx Setup.
Note :
This option does not dis-
able Manageability Fea-
tures in FW.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Active Management Technology BIOS
®
®
Rev. 5.0
www.dfi .com