DFI KD330-H110 User Manual page 59

4. In the Exit menu, select Exit Saving Changes then select Yes and press Enter.
InsydeH2O Setup Utility
Main Advanced Security Boot
Exit Saving Changes
Load Optimal Defaults
Discard Changes
Save Setting to fi le
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→  Select Item Enter
Chapter 5 Intel AMT Settings
Rev. 5.0
Exit
Exit system setup and save
your changes.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 6
Enable Intel AMT in the Intel
®
Engine BIOS Extension (MEBX) Screen
1. After the system reboots, press <Del> to enter the main menu of the Insyde BIOS.
2. In the Advanced menu, select MEBX Configuration.
Main Advanced
 ACPI Confi guration
 CPU Confi guration
 Video Confi guration
 Audio Confi guration
 SATA Confi guration
 USB Confi guration
 PCI Express Confi guration

ME Confi guration
 Active Management Technology Support
 MEBX Confi guration
 Debug Confi guration

UEFI Device Manager
 SIO NUVOTON6106D
 SIO NCT5104D
 Console Redirection
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item

3. Select MEBX Configuration and press Enter.
Advanced
MEBX Confi guration
MEBX Confi guration
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
59
Management
®
InsydeH2O Setup Utility
Security Boot Exit
MEBX Configuration Set-
ting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH2O Setup Utility
MEBX Configuration Set-
ting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
Rev. 5.0
Rev. 5.0
www.dfi .com