Chapter 6 - Intel Amt Settings (Cs100-Q370/C246 Only) - DFI CS100-Q370 User Manual

Chapter 6 - Intel AMT Settings (CS100-Q370/C246 only)

Overview
Intel Active Management Technology (Intel ®
provide maximum system defense and protection to networked systems.
The hardware and software information are stored in non-volatile memory. With its built-in
manageability and latest security applications, Intel
• Discover
Allows remote access and management of networked systems even while PCs are powered off;
significantly reducing desk-side visits.
• Repair
Remotely repair systems after OS failures. Alerting and event logging help detect problems
quickly to reduce downtime.
• Protect
Intel AMT's System Defense capability remotely updates all systems with the latest security
software. It protects the network from threats at the source by proactively blocking incoming
threats, reactively containing infected clients before they impact the network, and proactively
alerting when critical software agents are removed.
Chapter 6 Intel AMT Settings
AMT) combines hardware and software solution to
® AMT provides the following functions.
Chapter 6
Enable Intel AMT in the AMI BIOS
®
1. Power-on the system then press <Del> to enter the main menu of the AMI BIOS.
2. In the Advanced menu, select PCH-FW Configuration.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset
 RC ACPI Settings

 CPU Confi guration

 Power & Performance

PCH-FW Confi guration

 Trusted Computing

 PTN3460 Confi guration

 NCT6106D Super IO Confi guration

 NCT6106D HW Monitor

 Serial Port Console Redirection

 USB Confi guration

 CSM Confi guration

 Network Stack Confi guration

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
3. Select Enabled in the AMT BIOS Features field.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
ME State
Manageability Features State
AMT BIOS Features
 AMT Confi guration

ME Unconfi g on RTC Clear
 Firmware Update Confi guration

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
60
Security Boot Save & Exit
Confi gure Management
Engine Technology
Parameters
Select Screen

Select Item

Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
[Enabled] When disabled AMT
[Enabled] BIOS Features are no
[Enabled] longer supported and user
is no longer able to access
[Enabled] MEBx Setup.
Note:
This option does not
disable Manageability
Features in FW.
 Select Screen
 Select Item
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi .com