Software Utility - ICP DAS USA I-7530 User Manual

LED Name
ON LED
ERR LED

3. Software Utility

Users can download I-7530 Utility software from the ICP DAS web
site (http://www.icpdas.com/products/7000/i-7530.htm)
information from the ICP DAS companion CD-ROM. The I-7530 Utility
tool can be used to configure the operation condition between CAN and
RS-232 communications. Also it can be used to transmit or receive a CAN
message for simple testing of the module's functions. To start the "I-7530
Utility", please run the I7530.exe file, as shown in the below figure.
Connect the I-7530's COM port with the PC's COM port via a RS-232
cable. Then the user can connect the CAN interface into the CAN network
based on the CAN specifications. For further information related to this,
please refer to 1.5 section of this manual on how to make a hardware
connection.
I-7530 RS-232 to CAN Converter User's Manual (Version 1.0,Aug/2004, I-7530) ------------ 11
Figure 9: LED position
Table 3: LED indication
I-7530 Condition
Configuration Mode
Operation Mode
Some errors occurred
LED Status
Flashes once per second
Always turned on
Always turned on
or get this