S[Chk]<Cr - ICP DAS USA I-7530A-MR-G User Manual

the UART2CAN Utility in order to receive Syntax and/or communication
error information.
 Example:
Command: E010156786<CR>
Send a CAN message with an extended remote frame.
ID=01015678, DLC=6.
S[CHK]<CR>
4.5
Description: Read the I-7530A-MR CAN baud rate and error flag message.
 Syntax: S[CHK]<CR>
S
 Response: Valid Command: !CFFTTRRO[CHK]<CR>
!
C
FF
TT
RR
O
 Note: It is necessary to enable the "Error Response" function while using
the UART2CAN Utility in order to receive Syntax and/or communication
error information. Furthermore, all response results are shown in the ASCII
format. Users need to make an ASCII to hex format transformation in order
to understand what the meaning is. The following table shows all the
indications of the response of this command.
AsciiToHex(C)
I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.08, 07/2019) ------------- 48
Command character.
Invalid command: ?<Error Code>[CHK]<CR>
Delimiter for valid command
current baud rate setting of CAN
CAN status register
CAN transmit error counter
CAN receive error counter
CAN or RS-232/485/422 FIFO Overflow flag
Table 4-2: CAN baud rate list
0 10K baud rate of CAN
1 20K baud rate of CAN
2 50K baud rate of CAN
3 100K baud rate of CAN
Description