ICP DAS USA I-7530A-MR-G User Manual page 43

require users to click the "Send" button to transmit the command to the I-
7530A-MR module. When checking the "Timer (ms)", the Utility will
transmit the command periodically.
If the "Receive" is checked, the messages sent from the I-7530A-MR
will automatically be received and displayed in the "Receive" text box.
Besides, users can click the "Clear" button to remove the messages on
the text box. In addition, users can click the "Save" button to save the
"Receive" "I-7530A-
messages in the text box into the
MR_M_yyyyMMddmmss.txt " file. The indication of the file name is
described below.
Figure 3-32: The indication of the file name in the Modbus Slave mode.
I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.08, 07/2019) ------------- 43