Activating The Speed Dome - HIKVISION DS-2DT6223-AELY User Manual

13
Network Speed Dome User Manual
Network Cable
Figure 2-1 Connecting Directly
Network Cable Network Cable
Speed Dome Switch or Router
PC
Figure 2-2 Connecting via a Switch or a Router

2.1.2 Activating the Speed Dome

Purpose:
You are required to activate the speed dome first before you can use the speed
dome.
Activation via Web Browser, Activation via SADP, and Activation via client software
are supported. In the following sections, activation via web browser and SADP will be
taken as examples. You may refer to the user manual of the speed dome for the
details of activation via client software.
 Activation via Web Browser
Steps:
1. Power on the speed dome, and connect the speed dome to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
The default IP address of the speed dome is 192.168.1.64.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com