Configuring Osd Settings - HIKVISION DS-2DT6223-AELY User Manual

Network Speed Dome User Manual
This function varies depending on the models of speed dome.
 Video Standard
You can set the Video Standard to 50 Hz (PAL) or 60 Hz (NTSC) according to the video
system in your country.
This function varies depending on the models of speed dome.
 Capture Mode:
The Capture Mode can be selected from the list.
Other
 Lens Initialization
The lens operates the movements for initialization when you check the checkbox of
Lens Initialization.
 Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can
be selected from the list.
This function varies depending on the models of speed dome.
 Local Output
You can enable or disable the video output through the CVBS interface on your
demand.

6.3.2 Configuring OSD Settings

Purpose:
The speed dome supports following on screen displays:
Zoom: Identifies the amount of magnification.
Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The
XXX following P indicates the degrees in pan direction, while the XXX following T
indicates the degrees in tilt position.
Time: Supports for time display.
Preset Title: Identifies preset being called.
Camera Name: Identifies the name of speed dome.
You can customize the on screen display of time.
Steps:
www.a1securitycameras.com email: sales@a1securitycameras.com
Available from A1 Security Cameras
110