Handling Exception - HIKVISION DS-2DT6223-AELY User Manual

Network Speed Dome User Manual
time schedule configuration is the same as the settings of the arming schedule
for motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion
Detection.
6. You can copy the settings to other alarm outputs.
7. Click

5.2.6 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
1. Enter the Exception Settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 in Section 5.2.1 Configuring Motion Detection.
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 5-21 Alarm Output Settings
to save the settings.
Available from A1 Security Cameras
61