Table of Contents
Advertisement
Network Speed Dome User Manual
click the
the movement when the button turns to
5. Draw area.
(1) Click
(2) Click the line to switch to the editing mode.
Click and drag an end to the desired place to adjust the length and angle of
the line. And click and drag the line to adjust the location.
Up to four lines are supported.
6. Configure the parameters for each defense region separately.
Direction: Select the detection direction in the dropdown list, there are A<->B,
A->B and B->A selectable.
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the
object which can trigger the alarm, when the sensitivity is high, a very small
object can trigger the alarm.
Detection Target: You can select human, vehicle, or all (human &vehicle) as
www.a1securitycameras.com email: sales@a1securitycameras.com
button to manually activate the movement, or lock
Figure 5-26 Configuring Line
to draw a line on the image.
Available from A1 Security Cameras
67
by clicking it.
Advertisement
Table of Contents
