HIKVISION DS-2DT6223-AELY User Manual page 91

Network Speed Dome User Manual
captured pictures.
Steps:
1. Enter the FTP Settings interface:
Configuration > Network > Advanced Settings > FTP
2. Configure the FTP settings, including server address, port, user name, password,
directory, and upload type.
 For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (Using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters.) in
order to increase the security of your product.
 Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
The server address supports both the domain name and IP address formats.
Setting the directory in FTP server for saving files:

In the Directory Structure field, you can select the root directory, parent
directory and child directory.
 Root directory: The files will be saved in the root of FTP server.
 Parent directory: The files will be saved in a folder in FTP server. The
name of folder can be defined as shown in following Figure 6-12.
 Child directory: It is a sub-folder which can be created in the parent
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 6-11 FTP Settings
Figure 6-12 Parent Directory
Available from A1 Security Cameras
90