Table of Contents
Advertisement
97
Network Speed Dome User Manual
Figure 6-20 802.1X Settings
3. Check the Enable IEEE 802.1X checkbox to enable it.
4. Configure the 802.1X settings, including user name and password.
The EAP-MD5 version must be identical with that of the router or the switch.
5. Click
to finish the settings.
The camera reboots when you save the settings.
6. After the configuration, connect the camera to the protected network.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Advertisement
Table of Contents
