Maintenance/Web/Ssh Access; Maintenance/Upgrade - Grandstream Networks GXV3275 Administration Manual

MAINTENANCE/WEB/SSH ACCESS

Disable SSH
Access Method
Port
Admin Password
Confirm Admin Password
User Password
Confirm User Password

MAINTENANCE/UPGRADE

Download Device
Configuration
Configure via Keypad Menu
Authenticate Conf File
XML Config File Password
Always send HTTP Basic
Firmware Version 1.0.3.6
It is used to set if the phone system will block the SSH port.
If it is set to "Yes", the phone system will block any SSH access to the
phone. The default setting is "No".
It is used to set which protocol will be used to access the phone's Web
GUI. It can be selected from HTTP and HTTPS. The default setting is
HTTP.
It is used to set which port will be used to access the phone's Web GUI.
By default, if HTTP is selected, the port number will be 80; if HTTPS is
selected, the port number will be 443.
It is used to set the administrator password for Web GUI. It is case
sensitive with a maximum length of 32 characters. The default password
is "admin".
Please type the new Admin Password again.
It is used to set the user password for Web GUI. It is case sensitive with
a maximum length of 32 characters. The default password is "123".
Please type the new Admin Password again.
It is used to download the phone's configuration file in text format. The
config file includes all the P value parameters for phone's current
settings except password for security purpose. Users can use the
Grandstream configuration file generator to generate binary config file
from this text file.
It is used to set the end user's right to access the Settings from LCD
screen. There are two different options: Unrestricted and Basic
settings only. If the phone enables the Basic settings only, the
Advanced settings options in Settings will be hidden.
It is used to set if the phone system authenticate the configuration file
before applying it. If it set to "Yes", the configuration file must include
value P1 with phone system's administration password. If it is missed
or does not match the password, the phone system will not apply it.
The default setting is "No".
It is used to decrypt the XML configuration file which is encrypted by
OpenSSL. The default setting is keep this field blank.
It is used to set if the phone system includes the credential information
GXV3275 Administration Guide Page 73 of 103