Advanced Settings Page Definations; Advanced Settings/General Settings - Grandstream Networks GXV3275 Administration Manual

ADVANCED SETTINGS PAGE DEFINATIONS

ADVANCED SETTINGS/GENERAL SETTINGS

Local RTP Port
Use Random Port
Disable in-call DTMF display
Hide LDAP Contacts
Hide Call History
BS Call Log Update Interval (s)
Keep-alive Interval (s)
Firmware Version 1.0.3.6
It is used to define the local RTP-RTCP port pair used to listen and
transmit.
If it is configured with X, in channel 0 the port X will be used for audio
RTP message, the port X+1 for audio RTCP message, the port X+2 for
video RTP message and the port X+3 for video RTCP. In Channel 1, the
each port number will be incremented by 4 for each message. This
increment rule will apply to other channels and other port numbers.
By default , the Account 1 will use Channel 0, Account 2 Channel 1,
Account 3 Channel 2, Account 4 Channel 3, Account 5 Channel 4 and
Account 6 Channel 5.
If an account needs to establish multiple session simultaneously, the
system will use the ports in the next available channels.
The default value is 5004. The valid range is from 1024 to 65400.
It will force the phone system to use random ports for both SIP and RTP
messages. This is usually necessary when multiple phones are behind
the same full cone NAT. The default setting is "No".
Note: This parameter must be set to "No" for Direct IP Calling to work.
It will enable/disable the phone system to omit the DTMF digits
displaying from the LCD screen. The default setting is "No".
It will enable/disable the phone system to omit the LDAP contacts will
from LCD screen. If it is enabled, end user is not allowed to use it in the
Contact app. The default setting is "No".
It will enable/disable the phone system to omit the Local Call History will
from LCD screen. It only valid when the Broadsoft Xsi call logs feature is
enabled. If it is enabled, end user will enter the Broadsoft Xsi call logs
directly from the Call History app from the LDC screen. The default
setting is "No".
It is used to specify how often the phone system sends HTTP/HTTPS
query to the BroadWorks Xsp server to update the BroadWorks Call
History. The default setting is 1800 seconds.
It is used to specify how often the phone system will send a Binding
Request packet to the SIP server in order to keep the "ping hole" on the
NAT router to open. The default setting is 20 seconds. The valid range is
from 10 to 160.
GXV3275 Administration Guide Page 61 of 103