Vcore Voltage - Gigabyte GA-8ITX User Manual

CPU Frequency Ratio
8.0x, 10.0x~24.0x (Default Value: 8.0x)
RDRAM Bus Frequency
Auto
400MHz
300MHz

Vcore Voltage*

Original
+0.025V
+0.050V
+0.075V
+0.100V
Over RIMM Voltage*
Disabled
Enabled
Over AGP Voltage*
1.5V
1.6V
1.7V
1.8V
Memory ECC Mode
Enabled
Disabled
"*" For GA-8ITXR Only.
Set RDRAM Bus Frequency automatically. (Default Value)
Set RDRAM Bus Frequency to 400MHz. (If the current RDRAM is supported)
Set RDRAM Bus Frequency to 300MHz. (If the current RDRAM is supported)
Original Vcore Voltage. (Default Value)
Original Vcore Voltage +0.025V.
Original Vcore Voltage +0.050V.
Original Vcore Voltage +0.075V.
Original Vcore Voltage +0.100V.
Disable this funciton. (Default Value)
Enable Over RIMM Voltage function.
Set Over AGP Voltage to 1.5V.(Default Value)
Set Over AGP Voltage to 1.6V.
Set Over AGP Voltage to 1.7V.
Set Over AGP Voltage to 1.8V.
Enable Memory Data Check ECC Mode.
Disable this function. (Default Value)
3 7
BIOS Setup