Gigabyte GA-8ITX User Manual page 25

J: 2x11 pins jumper
GN (Green Switch)
GD (Green LED)
HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)
SPK (Speaker Connector)
RE (Reset Switch)
P-P-P+(Power LED)
PW (Soft Power Connector)
Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front
panel to the front panel jumper according to the pin assignment above.
1
1
1
1
1
Open: Normal Operation
Close: Entering Green Mode
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
2 1
Hardware Installation Process