Viewing Controller Settings - Gigabyte GA-8ITX User Manual

Viewing Controller Settings

The Controller Configuration <6> menu selection allows you to enable or disable the BIOS from
halting (the default) if it detects an error on boot up. You may also view the system resources (Interrupt
and I/O port address) of data channels
Channel 1 (IDE1)
Channel 2 (IDE2)
Halting BIOS On Bootup Errors
The [Adapter Configuration - Options] section allows you to enable or disable The system to Halt
operation at the BIOS startup screen should an error be detected. This is the only option that can be
changed on this screen.
Viewing System Resources
The [System Resources Configuration] section of this submenu displays the PCI slot interrupt and
port address used by the system. The resources used are determined by the Mainboard PCI PnP
BIOS for the PCI slot in which the system resides.
In the rare case that there is a resource conflict, refer to the Mainboard BIOS documentation on
changes on resources allocated to the system PCI slot.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Adapter Configuration - Options ]
Halt On Error:
[ System Resources Configuration ]
Interrupt : A I/O Port : FFF0
Interrupt : A I/O Port : FFA8
[ Keys Available ]
[ , Space] Change Option [ESC] Exit
Enable
9 7
Technical Reference