Step 3: Install Expansion Cards - Gigabyte GA-8ITX User Manual

GA-8ITX Series Motherboard

Step 3: Install expansion cards

1. Read the related expansion card's instruction document before install the expansion card into
the computer.
2. Remove your computer's chassis cover, necessary screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
When you try to install VGA Card, please note that the motherboard only
support AGP 4X(1.5V) VGA Card.
1 4