1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Motherboard
  5. GA-8ITML
  6. User manual

Gigabyte GA-8ITML User Manual

P4 titan-rdram motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
When you installing AGP card, please make sure the
following notice is fully understood and practiced. If your
AGP card has "AGP 4X notch"(show below), please make
sure your AGP card is AGP 4X (1.5V).
Do not use AGP 2X card (3.3V) in this motherboard. It will
burn and damage the motherboard due to Intel
can't support AGP 2X(3.3V).
Example 1: Diamond Vipper V770 golden finger is compatible
with 2X/4X mode AGP slot. It can be switched between AGP 2X
(3.3V) or 4X(1.5V) mode by adjusting the jumper. The factory
default for this card is 2X(3.3V). If you install this card in
GA-8ITML (or any AGP 4X only) motherboards without switching
the jumper to 4X mode (1.5V), it will burn the motherboard.
Example 2: ATi Rage 128 Pro (Power Color) & SiS 305 golden
finger is compatible with 2X/4X mode AGP slot, but it supports
2X(3.3V) only. If you install this card in GA-8ITML (or any AGP
4X only) motherboards, it will burn the motherboard.
®
850 chipset

Advertisement

Table of Contents
loading

Related Manuals for Gigabyte GA-8ITML

Summary of Contents for Gigabyte GA-8ITML

  • Page 1 Example 2: ATi Rage 128 Pro (Power Color) & SiS 305 golden finger is compatible with 2X/4X mode AGP slot, but it supports 2X(3.3V) only. If you install this card in GA-8ITML (or any AGP 4X only) motherboards, it will burn the motherboard.
  • Page 2 The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to up date the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard.

  • Page 3: Declaration Of Conformity

    (2) this device must accept any inference received, including that may cause undesired operation. Representative Person’s Name: G.B.T. INC. Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744 (818) 854-9338/ (818) 854-9339 Motherboard GA-8ITML ERIC LU Signature: Eric Lu Date: August 15,2001...
  • Page 4 (Stamp) Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH declare that the product Mother Board GA-8ITML is in conformity with in accordance with 89/336 EEC-EMC Directive EN 61000-3-2* EN 60555-2 EN 61000-3-3* EN 60555-3 EN 50081-1...
  • Page 5 GA-8ITML P4 Titan-RDRAM Motherboard USER’S MANUAL ® Pentium 4 Processor Motherboard Rev. 1.01 Third Edition 12ME-8ITML-1013...

  • Page 6: Table Of Contents

    Item Checklist ... 4 WARNING! ... 5 Chapter 1 Introduction ... 6 Summary of Features ... 6 GA-8ITML Motherboard Layout ... 8 Chapter 2 Hardware Installation Process ... 9 Step 1: Install the Central Processing Unit (CPU)... 10 CPU Installation ... 10 CPU Heat Sink Installation ...
  • Page 7 Chipset Features Setup ... 33 Power Management Setup ... 36 PNP/PCI Configuration ... 40 Load Fail-Safe Defaults ... 42 Load Optimized Defaults ... 43 Integrated Peripherals ... 44 Hardware Monitor & MISC Setup ... 50 Set Supervisor / User Password ... 52 IDE HDD Auto Detection...

  • Page 8: Revision History

    GA-8ITML Motherboard Revision History Revision 1.01 Initial release of the GA-8ITML motherboard user's manual. 1.01 Second release of the GA-8ITML motherboard user's manual. 1.01 Third release of the GA-8ITML motherboard user's manual. Item Checklist The GA-8ITML motherboard IDE cable x 1/ Floppy cable x 1 CD for motherboard driver &...

  • Page 9: Warning

    WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. Unplug your computer when working on the inside.

  • Page 10: Chapter 1 Introduction

    GA-8ITML Motherboard Chapter 1 Introduction Summary of Features Form Factor Chipset Memory I/O Control Slots On-Board IDE On-Board Peripherals Hardware Monitor 24.5cm x 24.3cm Micro ATX size form factor, 6 layers PCB. Socket 478 for Intel ® Micro FC-PGA2 Pentium ®...
  • Page 11 On-Board LAN On-Board Sound PS/2 Connector BIOS Additional Features Please set the CPU host frequency in accordance with your processor’s specifications. We don’t recommend you to set the system bus frequency over the CPU’s specification because these specific bus frequencies are not the standard specifications for CPU, chipset and most of the peripherals.

  • Page 12: Ga-8Itml Motherboard Layout

    GA-8ITML Motherboard GA-8ITML Motherboard Layout KB/MOUSE CPU_FAN CODEC JP23 MAIN BIOS POWER FAN SOCKET478 TEHAMA AGP1 PCI1 ICH2 PCI2 PCI3 USB_VS LED2 SYSTEM FAN BAT1 CN10...

  • Page 13: Chapter 2 Hardware Installation Process

    Chapter 2 Hardware Installation Process To set up your computer, you must complete the following setups: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires, and power supply Step 5- Setup BIOS software Step 6- Install supporting software tools Step 4...

  • Page 14: Step 1: Install The Central Processing Unit (Cpu)

    GA-8ITML Motherboard Step 1: Install the Central Processing Unit (CPU) CPU Installation Pin1 indicator CPU Top View Socket Actuation Lever 1. Pull up the CPU socket level and up to 90-degree angle. 3. Press down the CPU socket lever and finish CPU installation.

  • Page 15: Cpu Heat Sink Installation

    CPU Heat Sink Installation 1. Hook one end of the cooler bracket to the CPU socket first. Please use Intel approved cooling fan. We recommend you to apply the thermal tape to provide better heat conduction between your CPU and heatsink. (The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste.

  • Page 16: Step 2: Install Memory Modules

    GA-8ITML Motherboard Step 2: Install memory modules The motherboard has 4 Rambus In-line Memory Module (RIMM) sockets. The BIOS will automati- cally detect memory type and size. To install the memory module, just push it vertically into the RIMM Slot .The RIMM module can only fit in one direction due to the two notches. Please note; Both RIMM modules inserted on RIMM1 and RIMM2 slots are recommended to have the same size, frequency.

  • Page 17: Introduce Rimm (Rambus In-Line Memory Module)

    Introduce RIMM (Rambus In-line Memory Module) Direct Rambus Memory Controller Directly support a Dual Direct Rambus * Channel Supports 300&400 MHz Direct Rambus * Channel @ 100MHz host bus frequency. Maximum memory array size up to 256MB using 64Mb/72Mb, 512MB using 128Mb/144Mb, 1GB using 256Mb/288Mb DRAM technology Supports up to 32 Direct Rambus devices per channel Supports a maximum DRAM address decode space of 4GB...

  • Page 18: Step 3: Install Expansion Cards

    GA-8ITML Motherboard Step 3: Install expansion cards 1. Read the related expansion card’s instruction document before install the expansion card into the computer. 2. Remove your computer’s chassis cover, necessary screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard.

  • Page 19: Step 4: Connect Ribbon Cables, Cabinet Wires, And Power Supply

    Step 4: Connect ribbon cables, cabinet wires, and power supply I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector PS/2 Mouse Connector (6 pin Female) PS/2 Keyboard Connector (6 pin Female) Parallel Port and Serial Ports (COMA/COMB) Parallel Port (25 pin Female) COMA Serial Ports (9 pin Male)

  • Page 20: Audio Connectors

    GA-8ITML Motherboard USB/LAN Connector Connector USB 0 USB 1 Game /MIDI Ports Joystick/ MIDI (15 pin Female) Audio Connectors MIC In Line Out Line In Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip,speaker..etc.

  • Page 21: Connectors Introduction

    Connectors Introduction A POWER FAN B RIMM LED C ATX Power D AUX Power E SYSTEM FAN F IR/CIR G FLOPPY H IDE1/IDE2 Hardware Installation Process BATTERY J Front Panel K Wake On Lan L Front USB M Front Audio N CD IN O CPU_FAN P AUX 12V Power...
  • Page 22 GA-8ITML Motherboard A / E / O : POWER FAN / SYSTEM FAN / CPU FAN Connector POWER FAN The CPU fan connector supports Max. current up to 1A and Max. power up to 10W. B: RIMM LED RIMM LED...
  • Page 23 D: AUX Power +3.3VDC +3.3VDC +5VDC P: AUX +12V Power Connector +12V G / H: Floppy / IDE1 / IDE2 Connector(Primary/Secondary) The 6-pin Aux. Power connector provides additional current to meet the board's +3.3VDC and +5VDC requirments. Please refer to the detail on P.24 This connector (ATX +12V) is used only for CPU Core Voltage.
  • Page 24 GA-8ITML Motherboard F: IR/CIR CIRRX K: Wake On Lan +5V SB Signal L: Front USB Connector Make sure the pin 1 on the IR device is aling with pin one the connector. To enable the IR/CIR function on the board,...
  • Page 25 J: 2x11 pins jumper GN (Green Switch) GD (Green LED) HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) SPK (Speaker Connector) RE (Reset Switch) P-P-P+(Power LED) PW (Soft Power Connector) Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front panel to the front panel jumper according to the pin assignment above.
  • Page 26 GA-8ITML Motherboard M: Front Audio I: Battery If you want to use "Front Audio" connector, you must move 11-12,13-14 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header.

  • Page 27: Jumper Setting

    Hardware Installation Process Jumper Setting 1 USB_VS 1: PS/2 USB Device Wake Up selection 1-2 close: Enable 2-3 close: Disable(Default)

  • Page 28: Atx 12V Power Supply Introduction

    GA-8ITML Motherboard ATX 12V Power Supply Introduction -Additional 4 pin connector for 12V voltage -Backward compatibility maintained with load sharing capability -Support 12V or 5V CPU VRs Check power supply if it is supported by ATX12V Power Supply. 6 Pin Aux. Power Connector Step1: In a 45°...

  • Page 29: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Power ON the computer and press <Del>...

  • Page 30: The Main Menu (For Example: Bios Ver. :Fa2)

    GA-8ITML Motherboard GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.

  • Page 31: Power Management Setup

    BIOS Setup Power Management Setup This setup page includes all the adjustable items of Green function features. PNP/PCI Configurations This setup page includes all the adjustable configurations of PCI & PnP ISA resources. Load Fail-Safe Defaults Load Fail-Safe Defaults option loads preset system parameter values to set the system in its most stable configurations.

  • Page 32: Standard Cmos Features

    GA-8ITML Motherboard Standard CMOS Features AMIBIOS SETUP - STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Fri Mar 16, 2001 Time (hh/mm/ss) : 14:44:35 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE...
  • Page 33 Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00. Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer.

  • Page 34: Boot Sector Virus Protection

    GA-8ITML Motherboard Boot Sector Virus Protection If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector or partition table of the hard disk drive. The system will halt and the following error message will appear in the mean time.

  • Page 35: Bios Features Setup

    BIOS Features Setup AMIBIOS SETUP - BIOS FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved BIOS Flash Protection 1st Boot Device 2nd Boot Device 3rd Boot Device Floppy Drive Seek BootUp Num-Lock Password Check S.M.A.R.T. for Hard Disks BIOS Flash Protection Auto Will be automatically detected by BIOS.

  • Page 36: Password Check

    GA-8ITML Motherboard Floppy Drive Seek During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks. Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are all...

  • Page 37: Chipset Features Setup

    Chipset Features Setup AMIBIOS SETUP - CHIPSET FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Front Side Bus Clock (MHz) CPU Frequency Ratio RDRAM Bus Frequency Over RIMM Voltage Memory ECC Mode Graphics Aperture Size Delayed Transaction DMA Collection Buffer Front Side Bus Clock (MHz) When set to "By Hardware", the FSB clock frequency will be set to 100MHz.
  • Page 38 GA-8ITML Motherboard CPU Frequency Ratio 8:1, 10:1~24:1 (Default Value: 8:1) RDRAM Bus Frequency Auto Set RDRAM Bus Frequency automatically. (Default Value) 400MHz Set RDRAM Bus Frequency to 400MHz. (If the current RDRAM is supported) 300MHz Set RDRAM Bus Frequency to 300MHz. (If the current RDRAM is supported)

  • Page 39: Delayed Transaction

    Delayed Transaction Enabled Enable PCI 2.1 features including release and delayed transaction for the chipset. Disabled Disable this function. (Default Value) DMA Collection Buffer Enabled Enable DMA collection buffer for LPC I/F and PC/PCI DMA.(Default Value) Disabled Disable this function. BIOS Setup...

  • Page 40: Power Management Setup

    GA-8ITML Motherboard Power Management Setup AMIBIOS SETUP - POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Sleep Type USB Dev Wakeup From S3 Suspend Time Out (Minute) Throttle Slow Clock Ratio Soft-Off by Power Button...

  • Page 41: Throttle Slow Clock Ratio

    ACPI Sleep Type S1/POS Set ACPI Sleep Type to S1/POS (Power On Suspend). (Default value) S3/STR Set ACPI Sleep Type to S3/STR (Suspend To RAM). USB Dev Wakeup From S3 Enabled Enable USB Device Wakeup From S3. Disabled Disable USB Device Wakeup From S3. (Default value) Suspend Time Out Disabled 1Minute ~ 60 Minute...
  • Page 42 GA-8ITML Motherboard PME Event Wake up Disabled Disable PME event wake up function. Enabled The PME event wake up will bring the system out of soft-off or suspend state if this option is set "Enabled". (Default Value) Resume by RTC Alarm You can set "Resume by RTC Alarm "...
  • Page 43 Sec. Master IDE Access Monitor Monitor Secondary Master IDE Access. (Default Value) Ignore Ignore Secondary Master IDE Access. Sec. slave IDE Access Monitor Monitor Secondary slave IDE Access. Ignore Ignore Secondary slave IDE Access.(Default Value) PIRQ[A] IRQ Active Monitor Monitor PIRQ[A] IRQ Active. Ignore Ignore PIRQ[A] IRQ Active.

  • Page 44: Pnp/Pci Configuration

    GA-8ITML Motherboard PNP/PCI Configuration AMIBIOS SETUP - PNP/PCI CONFIGURATION ( C ) 1999 American Megatrends, Inc. All Rights Reserved Reset Configuration Data VGA Boot From PCI Slot 1 IRQ Priority PCI Slot 2 IRQ Priority PCI Slot 3 IRQ Priority...
  • Page 45 PCI Slot1, 2, 3 IRQ Priority Auto The system will reserved a free IRQ for PCI slot 1, 2, 3 device. (Default Value) The system will reserved IRQ3 for PCI slot 1, 2, 3 device if no legacy ISA device using IRQ3. The system will reserved IRQ for PCI slot 1, 2, 3 device if no legacy ISA device using IRQ4.

  • Page 46: Load Fail-Safe Defaults

    GA-8ITML Motherboard Load Fail-Safe Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24e (C) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGURATION LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS...

  • Page 47: Load Optimized Defaults

    Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24e (C) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGURATION LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit : Select Item F6: Load Fail-Safe Defaults...

  • Page 48: Integrated Peripherals

    GA-8ITML Motherboard Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard IDE IDE1 Conductor Cable IDE2 Conductoe Cable OnBoard FDC OnBoard Serial Port A OnBoard Serial Port B Serial Port B Mode...

  • Page 49: Onboard Ide

    OnBoard IDE Disabled Disable OnBoard IDE. Both Both Primary & Secondary IDE channel will be enabled. (Default Value) Primary Only Primary IDE channel is enabled. Secondary Only Secondary IDE channel is enabled. IDE1 Conductor Cable Auto Will be automatically detected by BIOS. (Default Value) ATA66/100 Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100).

  • Page 50: Ir Duplex Mode

    GA-8ITML Motherboard Onboard Serial Port B Auto BIOS will automatically setup the port B address. (Default Value) 3F8/COM1 Enable onboard Serial port B and address is 3F8. 2F8/COM2 Enable onboard Serial port B and address is 2F8. 3E8/COM3 Enable onboard Serial port B and address is 3E8.

  • Page 51: Parallel Port Mode

    Parallel Port Mode Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. (Default Value) Normal Normal Operation. EPP Version Disable this function. (Default Value) Compliant with EPP 1.9 version. Compliant with EPP 1.7 version. Parallel Port IRQ Set Parallel Port IRQ to 7.

  • Page 52: Usb Controller

    GA-8ITML Motherboard OnBoard Game Port Disabled Disable OnBoard Game Port. Set OnBoard Game Port to 200. (Default Value) Set OnBoard Game Port to 208. Mouse PowerOn Function Disabled Disable this function. (Default Value) Right -button Click right-button to power on the system.

  • Page 53: Ac97 Audio

    AC97 Audio Auto Enable onboard AC'97 audio function. (Default Value) Disabled Disable this function. AC97 Modem Auto BIOS will search MC97 Codec (AMR Modem Card). If found, MC97 function will be enabled. If no MC97 Codec found, MC97 function will be disabled.

  • Page 54: Hardware Monitor & Misc Setup

    GA-8ITML Motherboard Hardware Monitor & MISC Setup AMIBIOS SETUP - HARDWARE MONITOR & MISC SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved CPU Temp. Alarm CPU Fan Fail Alarm Power Fan Fail Alarm System Fan Fail Alarm Current CPU Temp.

  • Page 55: Current System Temp

    Fan Fail Alarm CPU / Power / System Fan Fail Alarm Function Disable. (Default Value) Fan Fail Alarm Function Enable. Current CPU Temp. Detect CPU Temp. automatically. Current System Temp. Detect System Temp. automatically. Current CPU Fan / System Fan / Power Fan Speed (RPM) Detect Fan speed status automatically.

  • Page 56: Set Supervisor / User Password

    GA-8ITML Motherboard Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. (C) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP...

  • Page 57: Ide Hdd Auto Detection

    IDE HDD Auto Detection AMIBIOS SETUP - STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Fri Mar 16, 2001 Time (hh/mm/ss) : 14:44:35 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Pri Master : Auto Pri Slave : Auto Sec Master : Auto...

  • Page 58: Save & Exit Setup

    GA-8ITML Motherboard Save & Exit Setup (C) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGURATION LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit : Select Item F6: Load Fail-Safe Defaults Type “Y”...

  • Page 59: Exit Without Saving

    Exit Without Saving AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24e (C) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP / PCI CONFIGURATION LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit F6: Load Fail-Safe Defaults Type “Y”...

  • Page 60: Chapter 4 Technical Reference

    GA-8ITML Motherboard Revision History Chapter 4 Technical Reference Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users.

  • Page 61: Block Diagram

    Block Diagram AGP 4X System Bus 100MHz AGPCLK (66MHz) 3 PCI KINNERETH 82562ET PCICLK (33MHz) PCICLK (33MHz) USBCLK (48MHz) 14.318 MHz Pentium 4 Socket 478 Intel 82850 RJ45 Intel ICH 2 4 USB ATA33/66/100 Ports IDE Channels CODEC 9250AF-37 33 MHz Technical Reference CPUCLK+/- (100MHz) RDRAM...

  • Page 62: Q-Flash Utility Introduction

    GA-8ITML Motherboard Q-Flash Utility Introduction A. What is Q-Flash Utility? Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS mode, no more fooling around any OS. B. How to use Q-Flash Flash? a. Boot Screen...
  • Page 63 Load BIOS From Floppy In the A:drive, insert the "BIOS" diskette, then Press Enter to Run. Input BIOS file name in the text box. Press "Enter". Load XXXX.XX Are you sure to COPY BIOS? [Enter] to Continue Or [Esc] to abort.. Congratulation! You have completed the flashed and now can restart system.

  • Page 64: Bios Introduction

    BIOS directly. Or you may want to keep a backup for your current BIOS, just choose “Save Current BIOS” to save it first. You make a wise choice to use Gigabyte, and @BIOS update your BIOS smartly. You are now worry free from updating wrong BIOS, and capable to maintain and manage your BIOS easily.

  • Page 65: Easy Tuneiii Tm Introduction

    Now everything is different because of a Windows overdrive utility EasyTuneIII—announced by Gigabyte. This utility has totally changed the gaming rule of “overdrive”. This is the first overdrive utility suitable for both normal and power users. Users can choose either “Easy Mode” or “Advanced Mode”...

  • Page 66: Chapter 5 Appendix

    GA-8ITML Motherboard Revision History Chapter 5 Appendix Picture below are shown in Windows ME (IUCD driver version 1.81) Appendix A: Intel 850 Chipset Driver Installation A. Windows 9x/ME/2000/XP INF Update Utility: Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide.
  • Page 67 Appendix 4.Click "Next". 5.Click "Finish" to restart computer.
  • Page 68 GA-8ITML Motherboard B. Intel Ultra ATA Storage Driver: Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe.
  • Page 69 Appendix 6.Click "Finish" to restart computer.
  • Page 70 GA-8ITML Motherboard Appendix B: RealTek AC’97 Audio Driver Revision History Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe.
  • Page 71 Appendix Appendix C: Intel 82562 Network Driver Revision History "Intel 82562 Network Driver" under Windows ME will auto install. If you would like to install LAN driver, please refer to attached README.txt file for detail instruction. Please install the driver through CD-ROM by the path D:\Network\Rtl (This manual assumes that your CD-ROM device drive letter is D:).
  • Page 72 GA-8ITML Motherboard Appendix D: EasyTuneIII Utilities Installation Revision History Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe.
  • Page 73 5.Click "Next". 6.Click "Next". 7.Click "Finish" to restart computer. Appendix...
  • Page 74 GA-8ITML Motherboard Appendix E: Issues To Beware Of When Installing CNR Please use standard CNR card like the one in order to avoid mechanical problem. (See Figure A) Figure A: Standard CNR Card...

  • Page 75: Cpu Central Processing Unit

    Appendix F: Acronyms Acronyms Meaning ACPI Advanced Configuration and Power Interface Advanced Power Management Accelerated Graphics Port Audio Modem Riser Advanced Communications Riser BIOS Basic Input / Output System Central Processing Unit CMOS Complementary Metal Oxide Semiconductor CRIMM Continuity RIMM Communication and Networking Riser Direct Memory Access Desktop Management Interface...
  • Page 76 GA-8ITML Motherboard Acronyms Meaning Logical Block Addressing Light Emitting Diode Megahertz MIDI Musical Interface Digital Interface Memory Translator Hub Memory Protocol Translator Network Interface Card Operating System Original Equipment Manufacturer PCI A.G.P. Controller POST Power-On Self Test Peripheral Component Interconnect...
  • Page 77 Technical Support/RMA Sheet Customer/Country: Contact Person: Model name/Lot Number: BIOS version: Hardware Mfs. Configuration Memory Brand Video Card Audio Card CD-ROM / DVD-ROM Modem Network AMR / CNR Keyboard Mouse Power supply Other Device Problem Description: Company: E-mail Add. : O.S./A.S.: Model name Size:...

Table of Contents