Operation; Initial Setup - Thermo Scientific 1500 A2 Series Operating Manual

Initial Setup

Thermo Scientific

Operation

Section 4
This section explains how to set up the device using the initial setup
routine.
When the unit is turned on for the first time after delivery to the customer
site, you must complete an initial setup process before you can use the
unit.
Proceed as follows to start up the unit:
1. Power up the device by connecting the external power source. A
startup screen with a "Start Setup" button appears, prompting you to
run the setup, as shown below.
Figure 4-1. Initial Startup: Startup Screen
2. Tap the "Start Setup" button. The initial setup screen appears as
shown below, prompting you to choose a display language, set the date
and time.
Figure 4-2. Initial Setup
1500 Series A2 4-1