Table of Contents
Advertisement
3.2.
By keypad
Alternatively or additionally to the factory infotainment buttons, the interface's external
keypad can be used to switch the enabled inputs. Even if not needed, the keypad should
always remain connected to the video interface for support purposes.
Long press of keypad (2-3 seconds)
Alternatively or additionally to the steering wheel's CALL OFF button, the interface's enabled
inputs can also be switched by the external keypad.
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources. If all inputs are activated by dip switch
settings, the order is the following:
Factory video
Each long press will switch to the next enabled input. Inputs which are not enabled will be
skipped.
Note: The interface switches after releasing the switch (after long pressure).
Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces witches from the factory video to
the front camera input and back to factory video.
If, with dip switch-1 setting „ON" (red 4dip), the source switching by infotainment button
doesn't succeed and further the external keypad doesn't work either, the dip switch
setting of dip-1 has to be changed to „OFF".
4. Specifications
BATT/ACC range
Stand-by power drain
Power
Video input
Video input formats
Temperature range
Dimensions video-box
Version 21.03.2022
Left (V1)
Right (V2)
7V - 25V
8mA
330mA @12V
0.7V - 1V
NTSC/PAL
-40°C to +85°C
117 x 25 x 104 mm (W x H x D)
HW:CAM (V100)/(V42,V43,V44)
factory video
CI-RL4-C3D
Advertisement
Table of Contents
