Connection - Quadlock - Can - r.LiNK CI-RL4-C3D Manual

2.3.2. Connection to Quadlock - CAN
Connect the female 10pin connector of the 10pin Power / CAN cable to the 10pin connector
of the video interface.
Remove the female Quadlock connector of the vehicle harness from the rear-side of the
head-unit and connect it to the male Quadlock connector of the Power / CAN cable.
Connect the opposite female Quadlock connector of the Power / CAN cable to the previously
become free male Quadlock connector at the rear-side of the head unit.
After the connections of the video interface have been done, carry out the following
technical checks:
Version 21.03.2022 HW:CAM (V100)/(V42,V43,V44) CI-RL4-C3D