Interface Operation; By Factory Infotainment Button; By Keypad; Specifications - r.LiNK CI-RL3-MIB-4 Manual

3. Interface operation

3.1.

By factory infotainment button

To switch the interface's activated video sources, the factory infotainment buttons can be
used.
For Skoda/Volkswagen/Audi vehicles
Press MENU button to switch the video-source
For Audi A3 vehicles
Press NAVI button to switch the video-source.
For Porsche vehicles
Press NAV button to switch the video-source.
Pressing the according infotainment button switches the input from the factory video to the
inserted video sources. If all inputs are activated by dip switch settings, the order is the
following:
Factory video
Each press will switch to the next enabled input. Inputs which are not enabled will be
skipped.
Switchover by vehicle buttons isn't possible in all vehicles. In some vehicles the external
keypad has to be used.
3.2.

By keypad

Alternatively or additionally to the factory infotainment buttons, the interface's external
keypad can be used to switch the enabled inputs. Even if not needed, the keypad should
always remain connected to the video interface for support purposes.

4. Specifications

BATT/ACC range
Stand-by power drain
Power
Video input
Video input formats
Temperature range
Dimensions video-box
Version 07.05.2020
 
Video IN 1 Video IN 2
7V - 25V
12mA
210mA @12V
0.7V - 1V
NTSC
-40°C to +85°C
119 x 24 x 114 mm (W x H x D)
HW: GD(V97)/(V33)

factory video
CI-RL3-MIB-4