Interface Operation; By Factory Infotainment Button; By Keypad - r.LiNK CI-RL4-MIB Manual

3. Interface operation

3.1.

By factory infotainment button

To switch the interface's activated video sources, the factory infotainment buttons can be
used.
For Skoda/Volkswagen/Audi vehicles
Press MENU button to switch the video-source
For Audi A3 vehicles
Press NAVI button to switch the video-source.
For Porsche vehicles
Press NAV button to switch the video-source.
Pressing the according infotainment button switches the input from the factory video to the
inserted video sources. If all inputs are activated by dip switch settings, the order is the
following:
Factory video
Each press will switch to the next enabled input. Inputs which are not enabled will be
skipped.
Switchover by vehicle buttons isn't possible in all vehicles. In some vehicles the external
keypad has to be used.
3.2.

By keypad

Alternatively or additionally to the factory infotainment buttons, the interface's external
keypad can be used to switch the enabled inputs. Even if not needed, the keypad should
always remain connected to the video interface for support purposes.
 Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources. If all inputs are activated by dip switch
settings, the order is the following:
Factory video
Each long press will switch to the next enabled input. Inputs which are not enabled will be
skipped.
Note: The interface switches after releasing the switch (after long pressure).
 Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces witches from the factory video to
the front camera input and back to factory video.
Version 16.03.2022
 
Video IN 1 Video IN 2
 
Left (V1) Right (V2)
HW:CAM(V100)/(V33)

factory video

factory video
CI-RL4-MIB