Checking The Compatibility Of Vehicle And Accessories - r.LiNK CI-RL4-C3D Manual

1.2.

Checking the compatibility of vehicle and accessories

Requirements
Hersteller Kompatible Fahrzeugmodelle
Giulia (952) since 05/2016,
Alfa Romeo
Stelvio (949) since 01/2017 til about 2020
Limitations
Video only
Factory rear-view camera
After market front camera
PDC and guidelines
Version 21.03.2022
The interface inserts ONLY video signals into the infotainment. For
inserting Audio signals either the possibly existing factory audio-AUX-
input or a FM-modulator can be used. If 2 audio sources shall be
connected to the infotainment, an additional electronic is necessary to
switch them.
Automatically switching-back from inserted video to factory rear-view
camera is only possible while the reverse gear is engaged. To delay the
switch-back an additional electronic part is required.
The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching is
possible by external keypad.
If the video interface does not receive the required information from
the vehicle CAN-bus, neither guide-lines nor optical PDC display will be
supported.
HW:CAM (V100)/(V42,V43,V44)
Navisystem
Connect Radio with 6.5inch monitor and
Connect 3D navigation with 8.8inch monitor
CI-RL4-C3D