Table of Contents
Advertisement
3.2.
By keypad
Alternatively or additionally to the factory infotainment buttons, the interface's external
keypad can be used to switch the enabled inputs. Even if not needed, the keypad should
always remain connected to the video interface for support purposes.
Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources. Each long press will switch to the next
enabled input. Inputs which are not enabled will be skipped.
Note: The interface switches after releasing the switch (after long pressure).
Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces witches from the factory video to
the front camera input and back to factory video.
4. Specifications
BATT/ACC range
Stand-by power drain
Power
Video input
Video input formats
Temperature range
Dimensions video-box
Version 29.10.2019
7V - 25V
8mA
320mA @12V
0.7V - 1V
NTSC
-40°C to +85°C
119 x 25 x 103 mm (W x H x D)
HW: CAM(V98)/UP(V20)
CI-RL4-MIB-TR
Advertisement
Table of Contents
