Proline Kryomats
9.2.2
Draining the water-cooled condenser
Remove the water hose on the water tap. Than open the solenoid valve for the water as described
below. Blow compressed air in the water return hose Continue until all water has flowed out of the
device.
Command
Pump
Settings
Graph
Clock
Programmer
Interfaces
Control
Limits
Pump
Menu
9.3
Servicing, cleaning, repair and disposal information
YAUE0007 / 10/2/2018
Important: With the risk of frost (e.g. transport in winter), drain the condenser on
water-cooled devices.
Pump Level
Ext.Pump
Start unfill conden
End
T
set
Start unfill condenser
Open the device parameter menu via the
soft key
Change from
Start unfill conden.
Use
the water. The display changes
automatically to the overview window.
To close the valve again selects this
menu again. The item is called now
End unfill conden.
T
fix
Maintenance
Menu .
Pump
using
.
to open the solenoid valve for
.
113