Proline Kryomats
Master: Alarm message
Command: Low level (pump)
(Pump motor monitoring: No load).
7.12.6.
Master: Alarm message
Command: Overpressure
(outflow pressure too high).
Compressor overtemperature
Three-phase current
9.4
Disposal information
9.4.1
Disposal of the refrigerant
. The type and filling quantity of the refrigerant can be read on the unit or on the rating plate. Repair
and disposal only through a qualified refrigeration engineer!
The following applies for EU member states: The disposal of the refrigerant must be carried out
according to EC Directive 2015/2067/EU in conjunction with 517/2014/EU.
9.4.2
Disposal of the packaging
The following applies for EU member states: The disposal of the packaging must be carried out
according to the EC Directive 94/62/EC.
YAUE0007 / 10/2/2018
PulEU
Error
The following applies for EU member states: The device must be disposed of
according to Directive 2012/19/EU (WEEE Waste of Electrical and Electronic
Equipment).
Maintenance
1. No liquid in the system. If this occurs, the level
monitoring has failed. Check whether the float
in the expansion vessel is blocked by foreign
bodies. Otherwise, contact LAUDA Service
Constant Temperature Equipment 9.5.
2. With the option "open load" the device draws air
out of the open load. Move the return to the
load.
11
Pump level too high Select a lower pump level
7.5.3.
7.12.7
7.12.8
119