Table of Contents
Advertisement
Status
Setpoint
Identification
Actual Parameters
Pump
Menu
Status
Setpoint
Identification
Actual Parameters
Pump
Menu
Status
Setpoint
Identification
Actual Parameters
Pump
Menu
88
30,00°C
End
T
T
set
intern
intern + extern
End
T
T
set
Store in Set 9
End
T
T
set
Starting up
With the menu
temperature for the test run can be set.
The bath temperature will oscillate less
than about ±15 Kelvin around the set
temperature.
Change the display in the adjacent
window and accept with
fix
With the menu
optimal control parameters for internal
control or for the internal control and
the external control can be detected
automatically.
To detect the control parameters for
the external application, a temperature
probe must be connected to the
thermostat.
fix
With the menu
actual set control parameters can be
stored in parameter set 9.
After the test run the detected control
parameters will be taken over as
control parameters automatically. If the
parameters found do not fulfil your
expectations, the before set
parameters can be restored (
7.11.3).
fix
Proline Kryomats
Setpoint
the set
.
Identification
the
Actual Parameters
the
YAUE0007 / 10/2/2018
Advertisement
Table of Contents
