Changing The Paper Size In The Optional Paper Tray Unit - Gestetner F104 Settings Manual

StellaF2_EN_Combine_F_FM.book Page 187 Friday, February 14, 2003 5:16 PM
E E E E
Push the metal plate down.
F F F F
Square the paper and load it in
the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ Fan the paper before loading it
in the tray.
❒ Load paper so that the paper
touches the right side of the
tray, or misfeed might occur.
G G G G
Push the paper tray in until it
stops.
Note
❒ Before you can use it, you must
change the paper size setting for
this tray using "Tray Paper Size
" function. See p.112 "Tray Pa-
per Size".
Changing the Paper Size
Changing the Paper Size in the
Optional Paper Tray Unit
Important
❒ Make sure that copying or printing
of received fax messages is not in
progress.
Note
❒ You can load up to 500 sheets of
copy paper in the optional paper
tray unit.
❒ For information about the size and
orientation of copy paper that you
can load in the unit, see p.210 "Pa-
per".
A A A A
Pull out the paper tray until it
stops.
Note
❒ Remove any remaining paper.
B B B B
Adjust the back fence.
9
ZFOY370E
187